 |
Sundström supplied air filter SR99 |
| >Home >All products >Sundström system >supplied airlines >air filter SR49 | ||||
 |
|
Sundström supplied air filter SR99 The filter unit produces breathing-quality air from ordinary compressed air. The unit consists of a regulator, pre-collector and main filter enclosed in a sheet steel chassis. The filter can be used standing on the floor or wall-mounted. The pre-collector, which has pressure-controlled/manual drainage, separates out coarse particles, water and oil. The inlet pressure is 6–10 bar. |
||
Description: |
Compressed air filter used to clean ordinary compressed air for safe breathing. Also suitable for cleaning air supply to pneumatic tools and instruments that require pure air. |
Use: |
Use between the compressor and the output device, e.g. a respirator or air tool. The SR 99 can be placed on the floor or wall-mounted |
Product name : |
SR 99 |
Function: |
Stage 1: Coarse particles (oil, water, dirt) are filtered out in the pre-filter, which has a pressure-controlled/manual drain. Stage 2: Air moves through the main filter (replaceable SR 292 filter). Stage 3: Main filter removes microscopic particles and oil odours. Stage 4: Air moves through a secondary P3 particle filter. |
| Filters/cartridges: | SR 292 filter, incorporating two particle (P3) filters — one on either side of an organic gas (A3) filter. Filter area of P3 filters: 2,200 cm2 approx. Activated carbon: approx. 500 grams Adsorption capacity: 100–150 g oil |
| Inlet: | 1/2" BSP, 6–10 bar |
| Outlets: | One safety coupling; one plugged opening. An additional Y coupling that doubles the number of outlets is available as an accessory |
| Maximum flow rate: | 900 litres/minute — three users |
Copyright © 2010 by The S.E.A. Group — all rights reserved