DATA SHEET

Sundström SR599 gas filter A1BE2K1HgP3R
organic gas/inorganic gas/acid gas/ammonia/mercury/particles

for Sundström half and full face masks

Updated: 09 Jul 2007

Description:

Organic gas/inorganic gas/acid gas/ammonia/mercury/particle filter class A1BE2K1HgP3R* for use with Sundström SR500 powered air purifying respirator (PAPR)

*) R = reuseable. Filter intended to be used for more than a single shift.

Product name:
SR599
Use:

The filter protects against the following types of gases, vapours and particles:

Type Protection
A Organic gases and vapours, such as solvents, with boiling points above +65°C.
B Inorganic gases and vapours, such as chlorine, hydrogen sulphide, hydrogen cyanide.
E Acid gases and vapours, such as sulphur dioxide, hydrogen fluoride.
K Ammonia and certain amines, such as ethylene diamine
Hg Mercury vapour. NOTE: max use 50 hours.
P3 All types of particulates, such as dust, mist, and smoke.
Material:
Plastic polypropylene. No metal parts
Weight:
420 g (14.8 oz)
Dimensions:

Largest diameter: 138 mm (5.4")
Thickness: 89 mm (3.5")

Temperature:
  • Service: –10°C to +55°C, <90% Rel. Hum.
  • Storage: –20°C to +40°C, <90% Rel. Hum.
Capacity:
Test gas Conc (ppm) B'through (min) EN Stand. req.*
A1, Cyclohexane 500 >80 70
B1, Chlorine 1,000 >30 20
B1, Hydr. sulph. 1,000 >60 40
B1, Hydr. cyan. 1,000 >35 25
E1, Sulphur dioxide 1,000 >30 20
K1, Ammonia 500 >75 50
Hg, Mercury vapour 13 mg/m3 >104 hours 100 hours

*) Minimum requirements as per EN12941/12942:1998

Particle filtration efficiency:
Paraffin oil: >99.997%
Storage: Store at room temperature in clean, dry place
Parts:
  1. Activated carbon
  2. Filter disc
  3. Hot-melt adhesive
  4. Particle filter medium
  5. Filter case
  6. Marking label
Approvals: EN 12941/12942:1998 (Australian and other approvals to follow)