Datasheet: Tyvek protective suit

DATA SHEET

Tyvek Suit

Protective suit for SE400

Updated: 01 Feb 2005

Description:

Protective dust suit, specially made for use with SE400 positive pressure demand respirator. Disposable, single-use only. The SE400 can be fitted with an optional pressurisation hose which maintains a slight positive pressure inside the suit.

Product name:

S.E.A. Tyvek^® protective suit

Use:

Used to protect the entire body while wearing the SE400 respirator. Protects against particles, sprays and splashes. Suitable for dusty, dirty work.

Material:

Tyvek^® material (very fine high-density polyethylene [spunbonded Olefin] fibre.

Light-weight
Low-lint
Anti-static. When earthed, electrostatic build-up is prevented
Tear and abrasion resistant
Outstanding holdout resistance to fine particles and fibres
Resists liquid splashes up to a pressure of 0.13 bar (130 cm water column)
Ultra-smooth surface that that repels inorganic liquids and minimises solid particles adhering to the surface of the suit
Non-woven fabric
Permeable to both air and water vapour, allowing the fabric to 'breathe'
Light, soft, flexible feel

Suit construction :

Visor seal:: Fits tightly around the rim of the full face mask.
SE400 hose:: A hose sleeve fits around the entire length of the hose.
SE400 filters:: Sealed off from the interior of the suit by two threaded sealing rings.
SE400:: The SE400 fan unit is worn on a balanced, convenient back-pack inside the suit.

DATA SHEET Tyvek Suit Protective suit for SE400
Updated: 01 Feb 2005
Description:	Protective dust suit, specially made for use with SE400 positive pressure demand respirator. Disposable, single-use only. The SE400 can be fitted with an optional pressurisation hose which maintains a slight positive pressure inside the suit.
Product name:	S.E.A. Tyvek^® protective suit
Use:	Used to protect the entire body while wearing the SE400 respirator. Protects against particles, sprays and splashes. Suitable for dusty, dirty work.
Material:	Tyvek^® material (very fine high-density polyethylene [spunbonded Olefin] fibre. Light-weight Low-lint Anti-static. When earthed, electrostatic build-up is prevented Tear and abrasion resistant Outstanding holdout resistance to fine particles and fibres Resists liquid splashes up to a pressure of 0.13 bar (130 cm water column) Ultra-smooth surface that that repels inorganic liquids and minimises solid particles adhering to the surface of the suit Non-woven fabric Permeable to both air and water vapour, allowing the fabric to 'breathe' Light, soft, flexible feel
Suit construction :	Visor seal: Fits tightly around the rim of the full face mask. SE400 hose: A hose sleeve fits around the entire length of the hose. SE400 filters: Sealed off from the interior of the suit by two threaded sealing rings. SE400: The SE400 fan unit is worn on a balanced, convenient back-pack inside the suit.