Organic gas/inorganic gas/acid gas/ammonia/mercury/particle filter class ABEK1HgP3 (regular capacity).
Plastic polypropylene. No metal parts.
|A|| Organic gases and vapours, such as solvents, with boiling points above +65°C. |
|B|| Inorganic gases and vapours, such as chlorine, hydrogen sulphide, hydrogen cyanide. |
|E|| Acid gases and vapours, such as sulphur dioxide, hydrogen fluoride. |
|K|| Ammonia and certain amines, such as ethylene diamine |
|Hg|| Mercury vapour. NOTE: max use 50 hours. |
|P||All types of wet and dry particles, such as dust, mist, smoke, fume, bacteria, viruses, mould, fibre|
— Largest diameter: 106 mm
— Thickness: 53 mm
The filter contains 145 g of activated carbon.
|Test gas||Conc. (PPM)||B'through (min)|
|B1: Hydrogen sulphide||1,000||>120 (test stopped - no breakthrough)|
|B1: Hydrogen cyanide||1,000||50|
|E: Sulphur dioxide||1,000||45|
|Hg: Mercury vapour||13 mg/m3||>200 hours (test stopped - no breakthrough)|
At 30 l/min: 140 Pa (standards requrement: <220 Pa)
Store at room temperature in clean, dry place. If seal has been broken, store away from contaminants in an air-tight container. Shelf life is 5 years if seal is unbroken. Expiry date printed on filter.